Two pieces of high-density polyethylene [E = 0.86 GPa] tubing are fitted together and firmly clamped at their ends. A load of 141 N is applied to the fitting. Tube (1) is 140 mm long, and tube (2) is 95 mm long. Both tubes have an outsider diameter of 23.0 mm and an inside diameter of 18.2 mm. Determine the load carried by tube (1).

Two pieces of high-density polyethylene [E = 0.92 GPa] tubing are fitted together and firmly clamped at their ends. A load of 182 N is applied to the fitting. Tube (1) is 140 mm long, and tube (2) is 105 mm long. Both tubes have an outsider diameter of 21.0 mm and an inside diameter of 15.8 mm. Determine the load carried by tube (1).

Two pieces of high-density polyethylene [E = 0.90 GPa] tubing are fitted together and firmly clamped at their ends. A load of 140 N is applied to the fitting. Tube (1) is 160 mm long, and tube (2) is 105 mm long. Both tubes have an outsider diameter of 21.0 mm and an inside diameter of 16.4 mm. Determine the load carried by tube (1).

Axial loads are applied with rigid bearing plates to the solid cylindrical rods. One load of P = 110 kN is applied to the assembly at A, two loads Q = 40 kN are applied at B, and two loads R = 130 kN are applied at C. Determine the total change in length of the assembly.L1 = 0.24 m, E1 = 194 GPa, A1 = 0.0014 m2L2 = 0.42 m, E2 = 208 GPa, A2 = 0.0003 m2L3 = 0.30 m, E3 = 108 GPa, A3 = 0.0016 m2

A load of P = 645 lb is applied to beam ABC. Bar (1) is made of aluminum [E = 10,600 ksi] and has a square cross section with a width of 0.88 in. Determine the magnitude of the change in length of bar (1) due to the load. Let a = 33 in., b = 14 in., and c = 10 in.

If the double-shear pin at D has a diameter of 0.650 in., an allowable shear strength of 14 ksi, and a factor of safety of 1.7, determine the maximum load P that can be applied to beam ABC. Let a = 32 in., b = 14 in., and c = 9 in.

A 3D printed polymer rod measures 115.00 mm in length while on the heated print bed at 67.0°C. After cooling to room temperature at 21.9°C the rod measures 114.69 mm in length. Determine the coefficient of thermal expansion of the polymer.

Axial loads are applied with rigid bearing plates to the solid cylindrical rods. One load of P = 90 kN is applied to the assembly at A, two loads Q = 40 kN are applied at B, and two loads R = 150 kN are applied at C. Determine the total change in length of the assembly.L1 = 0.26 m, E1 = 192 GPa, A1 = 0.0014 m2L2 = 0.42 m, E2 = 212 GPa, A2 = 0.0003 m2L3 = 0.34 m, E3 = 108 GPa, A3 = 0.0015 m2

A 3D printed polymer rod measures 110.00 mm in length while on the heated print bed at 50.7°C. After cooling to room temperature at 21.6°C the rod measures 109.77 mm in length. Determine the coefficient of thermal expansion of the polymer.

A load of P = 415 lb is applied to beam ABC. Determine the normal force in bar (1). Let a = 32 in., b = 15 in., and c = 8 in.