Most beams and columns are subjected to some degree of both bending and axial load.

A W14x68 of A992 steel is to be investigated for use as a beam-column in an unbraced frame. The length is 15 feet. First-order analyses of the frame were performed for both the sway and nonsway cases. The factored loads and moments corresponding to one of the load combinations to be investigated are given for this member in the following table. Bending is around the strong axis. The effective length factors are Kx = 1.0 for the braced case, Kx = 1.0 for the unbraced case, and Ky = 1.0. The multiplier to account for P-δ effects was determined to be 1.05, and the multiplier to account for P-Δ effects was determined to be 1.18. Using LRFD and Cb = 1.0, determine the value of the AISC interaction equation.Type of analysisPu (kips)Mtop (kip-ft)Mbottom (kip-ft)Nonsway2903518Sway903090 

A W14x74 of A992 steel is to be investigated for use as a beam-column in an unbraced frame. The length is 13 feet. First-order analyses of the frame were performed for both the sway and nonsway cases. The factored loads and moments corresponding to one of the load combinations to be investigated are given for this member in the following table. The multiplier to account for P-δ effects was determined to be 1.17, and the multiplier to account for P-Δ effects was determined to be 1.21. Determine the required second-order axial strength, Pr, of the member.Type of analysisPu (kip)Mtop (kip-ft)Mbottom (kip-ft)Nonsway3504530Sway10555110 

A W14x82 of A992 steel is to be investigated for use as a beam-column in an unbraced frame. The length is 13 feet. First-order analyses of the frame were performed for both the sway and nonsway cases. The factored loads and moments corresponding to one of the load combinations to be investigated are given for this member in the following table. The multiplier to account for P-δ effects was determined to be 1.14, and the multiplier to account for P-Δ effects was determined to be 1.26. Determine the required second-order axial strength, Pr, of the member.Type of analysisPu (kip)Mtop (kip-ft)Mbottom (kip-ft)Nonsway3755516Sway1305595 

A W14x74 of A992 steel is to be investigated for use as a beam-column in an unbraced frame. The length is 15 feet. First-order analyses of the frame were performed for both the sway and nonsway cases. The factored loads and moments corresponding to one of the load combinations to be investigated are given for this member in the following table. Bending is around the strong axis. The effective length factors are Kx = 1.0 for the braced case, Kx = 1.0 for the unbraced case, and Ky = 1.0. The multiplier to account for P-δ effects was determined to be 1.18, and the multiplier to account for P-Δ effects was determined to be 1.14. Using LRFD and Cb = 1.0, determine the value of the AISC interaction equation.Type of analysisPu (kips)Mtop (kip-ft)Mbottom (kip-ft)Nonsway4003526Sway604590 

A W14x82 of A992 steel is to be investigated for use as a beam-column in an unbraced frame. The length is 14 feet. First-order analyses of the frame were performed for both the sway and nonsway cases. The factored loads and moments corresponding to one of the load combinations to be investigated are given for this member in the following table. The multiplier to account for P-δ effects was determined to be 1.14, and the multiplier to account for P-Δ effects was determined to be 1.14. Determine the required second-order flexural strength, Mr, at the top of the member.Type of analysisPu (kips)Mtop (kip-ft)Mbottom (kip-ft)Nonsway4804532Sway19035105 

Compute the LRFD elastic critical buckling strength, Pe1, for the W10x88 made from ASTM A992 steel with L = 16 ft, P = 250 kip, M = 280 kip-ft, and Kx = Ky = 1.0. Bending is about the x axis. The member is part of a braced frame, and the given service loads are 30% dead load and 70% live load. The frame analysis was performed consistent with the effective length method, so the flexural rigidity was unreduced.

An unbraced beam-column within a rigid frame has an Euler buckling strength of 2,471 kips with a story shear of 4.83 kips. What is the drift index for the column?

A W14x82 of A992 steel is to be investigated for use as a beam-column in an unbraced frame. The length is 14 feet. First-order analyses of the frame were performed for both the sway and nonsway cases. The factored loads and moments corresponding to one of the load combinations to be investigated are given for this member in the following table. The multiplier to account for P-δ effects was determined to be 1.14, and the multiplier to account for P-Δ effects was determined to be 1.13. Determine the required second-order axial strength, Pr, of the member.Type of analysisPu (kip)Mtop (kip-ft)Mbottom (kip-ft)Nonsway4303018Sway1355090 

A W14x82 of A992 steel is to be investigated for use as a beam-column in an unbraced frame. The length is 15 feet. First-order analyses of the frame were performed for both the sway and nonsway cases. The factored loads and moments corresponding to one of the load combinations to be investigated are given for this member in the following table. The multiplier to account for P-δ effects was determined to be 1.16, and the multiplier to account for P-Δ effects was determined to be 1.22. Determine the required second-order axial strength, Pr, of the member.Type of analysisPu (kip)Mtop (kip-ft)Mbottom (kip-ft)Nonsway3653533Sway18540110