(b) Determine the annual quantity of product molded. (Round to the nearest whole number) 

(a) Determine the hourly production rate of the machine. (Round to the nearest two decimal places) 

Use this problem description to answer the following three questions.  A plastic molding machine produces a product whose annual demand is in the millions. The machine is automated and used full time just for the production of this product. The molding cycle time = 45 sec. No tooling is required other than the mold, which cost $100,000 and is expected to produce 1,000,000 moldings (products). The plastic molding compound costs $1.20/lb. Each molding weighs 0.88 lb. The only labor required is for a worker to periodically retrieve the moldings. Labor rate of the worker = $18.00/hr including overhead. However, the worker also tends other machines and only spends 20% of his time on this machine. Setup can be ignored because of the long production run. The molding machine was purchased for $500,000 installed, its anticipated life = 10 years, and it operates 6,000 hours per year. Equipment overhead rate = 30%. Availability = 100% and scrap rate = 0.   

What type of tolerance in shown in the figure below?

What are the differences between primary, secondary, and tertiary industries? Give an example of each category.

 Name the three basic categories of engineering materials.  [1] [2] [3]

The purpose of ___________ in sheet metal cutting is to allow the cut parts to fall out, and not get stuck. 

A patient comes to the health clinic 3 years after undergoing a resection of their intestine. They are complaining of weakness, shortness of breath, and a sore tongue. Which patient statement indicates a need for further teaching?

The nurse recognizes which prescribed medication is indicated to prevent the formation of clots for a patient diagnosed with deep vein thrombosis (DVT)?

A 40-year-old man with a history of uncontrolled diabetes presents to the clinic for his yearly follow-up. His recent laboratory tests show sodium 132 mEq/L (normal 136–145 mEq/L), creatinine 1.4 mg/dL, GFR 55 mL/min/1.73 m2, and glucose 350 mg/dL. His urinalysis is positive for glucose. He is asymptomatic. Which of the following is high priority and next step in his management?