GradePack

    • Home
    • Blog
Skip to content
bg
bg
bg
bg

Author Archives: Anonymous

Determine the flat roof snow load, pf, for a building kept b…

Determine the flat roof snow load, pf, for a building kept below freezing with a roof that is fully exposed in terrain category B and has a risk category of I. Assume the ground snow load is 54 psf. Do not consider the minimum roof snow load, pm.

Read Details

If a building contains columns that are evenly spaced every…

If a building contains columns that are evenly spaced every 20 feet in the north-south direction and 17 feet in the east-west direction, the tributary area of a typical corner column would be _______.

Read Details

The two columns in the following floor framing plan support…

The two columns in the following floor framing plan support only loads from a gymnasium on the second floor. The city has approved floor live load reductions for this particular building. A dead load of 11.4 psf acts on the tributary area of the columns. Combine this with the reduced floor live load, and then determine the total load that acts on one of the columns.

Read Details

The following roofing materials are stacked on a pallet at a…

The following roofing materials are stacked on a pallet at a construction site. The pallet is 4 ft by 7 ft, and the materials have been cut and stacked so that each layer completely covers the pallet. Use ASCE 7-10 to determine the total dead load resting on the pallet.4 layers of fiberboard, 1/2-in.7 layers of decking, 2-in. wood (Douglas fir)7 layers of plywood, 5/8-in. thick

Read Details

A column is loaded in compression as follows. What is the co…

A column is loaded in compression as follows. What is the controlling factored load for ASD?Dead load: 19 kipsFloor live load: 7 kipsRoof rain load: 6 kipsRoof live load: 11 kips

Read Details

A 9-ft-long, simply-supported beam supports a concentrated d…

A 9-ft-long, simply-supported beam supports a concentrated dead load of 560 lb at its center. Determine the maximum bending moment in the beam.

Read Details

The following roof framing plan shows girders, purlins, and…

The following roof framing plan shows girders, purlins, and subpurlins. If a dead load of 7.57 psf acts on the tributary area of one of the sub-purlins, determine the equivalent distributed load that acts on the sub-purlin.

Read Details

Determine the flat roof snow load, pf, for a building kept j…

Determine the flat roof snow load, pf, for a building kept just above freezing with a roof that is fully exposed in terrain category C and has a risk category of I. Assume the ground snow load is 52 psf. Do not consider the minimum roof snow load, pm.

Read Details

If a building contains columns that are evenly spaced every…

If a building contains columns that are evenly spaced every 29 feet in the north-south direction and 24 feet in the east-west direction, the tributary area of a typical corner column would be _______.

Read Details

Determine the rain load, R, on a flat roof given the followi…

Determine the rain load, R, on a flat roof given the following data.Vertical distance from primary roof drain to scupper inlet, ds = 5.5 in.Vertical distance to top of rain water above scupper inlet, dh = 5.0 in.

Read Details

Posts pagination

Newer posts 1 … 47,256 47,257 47,258 47,259 47,260 … 90,717 Older posts

GradePack

  • Privacy Policy
  • Terms of Service
Top