El mango y las uvas tienen un sabor (flavor) muy [q13].

If a hooked anchorage exceeds its limits, it tends to fail by _______.

A simply supported beam with dimensions of b = 18 in., h = 30 in., d = 27.5 in., and L = 22 ft supports a uniform service (unfactored) dead load of 2.2625 kips/ft including its own self weight plus a uniform service (unfactored) live load of 1.2 kips/ft. The beam is reinforced with five No. 8 Grade 60 bars. The concrete strength is 9,700 psi (normal weight). The beam has Grade 60 No. 3 stirrups. Determine the effective moment of inertia, Ie.The cracked moment Mcr = 166.2 kip-ft, and the maximum applied bending moment due to the combined service loads (dead plus live) Ma = 209.5 kip-ft. The neutral axis location of the cracked beam (measured from the top of the beam) is 6.8434 in.

What is the easiest way to test the bond strength of bars in a laboratory?

Determine the bar-spacing factor, cb, for a simply supported rectangular beam with b = 20 in. and No. 3 stirrups. This beam has three No. 7 bars as longitudinal reinforcement. The clear cover is 1.6 in.

A simply supported beam with dimensions of b = 16 in., h = 22 in., d = 19.5 in., and L = 16 ft supports a uniform service (unfactored) dead load of 1.466667 kips/ft including its own self weight plus a uniform service (unfactored) live load of 1.3 kips/ft. The beam is reinforced with three No. 6 Grade 60 bars. The concrete strength is 8,500 psi (normal weight). The beam has Grade 60 No. 3 stirrups. Determine the effective moment of inertia, Ie.The cracked moment Mcr = 74.37 kip-ft, and the maximum applied bending moment due to the combined service loads (dead plus live) Ma = 88.53 kip-ft. The neutral axis location of the cracked beam (measured from the top of the beam) is 3.783 in.

A rectangular beam has a cross section of b = 18 in., h = 22 in., and d = 19.5 in. It is reinforced with four No. 6 Grade 60 bars. The concrete strength is 4,300 psi (normal weight). The beam has Grade 60 No. 3 stirrups. Determine the cracking moment, Mcr.

A rectangular beam has a cross section of b = 14 in., h = 26 in., and d = 23.5 in. It is reinforced with four No. 6 Grade 60 bars. The concrete strength is 7,900 psi (normal weight). The beam has Grade 60 No. 3 stirrups. Determine the modulus of rupture of the concrete, fr.

Which of the following should NOT be used to determine the location of bar cutoff points?

What λ value should be used for lightweight-aggregate concrete?