A beam has dimensions of b = 14 in., h = 24 in., and d = 21.5 in. and is reinforced with 5 No. 7 bars. The concrete strength is 3,700 psi, and the yield strength of the reinforcement is 60,000 psi. Assuming the reinforcement has yielded, determine the tensile force T in the reinforcement.

A beam is singly reinforced with the reinforcement in two rows. The bottom row contains 10 No. 6 bars at a depth of 22 in. The top row contains 7 No. 6 bars at a depth of 19 in. Determine the effective (centroidal) depth, d, of the steel.

A classmate has suggested a beam design that has dimensions of b = 16 in., h = 26 in., and d = 23.5 in. and is reinforced with 4 No. 7 bars. Assuming a cover of 1.5 in. and a stirrup diameter of 0.5 in., does the reinforcement fit within a single row as suggested?

You are considering a beam design that has dimensions of b = 16 in., h = 22 in., and d = 19.5 in. The beam is singly reinforced with all of the reinforcement in a single row. The concrete strength is 2,500 psi, and the yield strength of the reinforcement is 60,000 psi. What cross-sectional area of reinforcement is needed to achieve a strain in the reinforcement of 0.0075?

A beam has dimensions of b = 14 in., h = 24 in., and d = 21.5 in. and is reinforced with 2 No. 5 bars. The concrete strength is 4,300 psi, and the yield strength of the reinforcement is 60,000 psi. Assuming the reinforcement has yielded, determine the depth to the neutral axis, c.

The basic strength requirement from ACI 318 is “Reduced nominal strength ​≥ Factored load effects.”

Bars of longitudinal reinforcement often do not have to extend the full length of a beam.

Which of the following medications is most commonly used to treat ADHD in adults, and under which condition would it not be appropriate?

A decrease in concrete cover is sometimes required to deal with abrasion and wear due to traffic.

Ductility is the name given to a sample’s ability to deform beyond its yield point without a significant loss of strength.