Beside the Syllabus, where in the course’s Canvas shell can you find the Course Calendar?

A beam has dimensions of b = 14 in., h = 26 in., d’ = 2.5 in., and d = 23.5 in. It is reinforced with 2 No. 5 bars on the compression side and 5 No. 8 bars on the tension side. The concrete strength is 3,700 psi, and the yield strength of the reinforcement is 60,000 psi. For the results given below, determine the strength Mn for this beam.a = 4.75 in. (depth of concrete stress block)Cc = 207.2 kips (compressive force in concrete)Cs = 29.8 kips (compressive force in steel)T = 237.0 kips (tensile force in steel)

Isolated beams with unsymmetrical cross sections cannot deflect vertically and laterally at the same time.

A beam has dimensions of b = 14 in., h = 30 in., d’ = 2.5 in., and d = 27.5 in. It is reinforced with 2 No. 5 bars on the compression side and 4 No. 8 bars on the tension side. The concrete strength is 3,100 psi, and the yield strength of the reinforcement is 60,000 psi. For the results given below, determine the strength Mn for this beam.a = 4.424 in. (depth of concrete stress block)Cc = 161.6 kips (compressive force in concrete)Cs = 28.0 kips (compressive force in steel)T = 189.6 kips (tensile force in steel)

Find the angle between the given vectors to the nearest tenth of a degree. u = , v = (5 points)

A beam has dimensions of b = 14 in., h = 24 in., and d = 21.5 in. and is reinforced with 5 No. 7 bars. The concrete strength is 3,700 psi, and the yield strength of the reinforcement is 60,000 psi. Assuming the reinforcement has yielded, determine the tensile force T in the reinforcement.

A beam is singly reinforced with the reinforcement in two rows. The bottom row contains 10 No. 6 bars at a depth of 22 in. The top row contains 7 No. 6 bars at a depth of 19 in. Determine the effective (centroidal) depth, d, of the steel.

A classmate has suggested a beam design that has dimensions of b = 16 in., h = 26 in., and d = 23.5 in. and is reinforced with 4 No. 7 bars. Assuming a cover of 1.5 in. and a stirrup diameter of 0.5 in., does the reinforcement fit within a single row as suggested?

You are considering a beam design that has dimensions of b = 16 in., h = 22 in., and d = 19.5 in. The beam is singly reinforced with all of the reinforcement in a single row. The concrete strength is 2,500 psi, and the yield strength of the reinforcement is 60,000 psi. What cross-sectional area of reinforcement is needed to achieve a strain in the reinforcement of 0.0075?

A beam has dimensions of b = 14 in., h = 24 in., and d = 21.5 in. and is reinforced with 2 No. 5 bars. The concrete strength is 4,300 psi, and the yield strength of the reinforcement is 60,000 psi. Assuming the reinforcement has yielded, determine the depth to the neutral axis, c.