The FINAL EXAM itself is uploaded here as a Word document attachment. The approved FL Rules of Civil Procedure are also uploaded both here and on Canvas (see announcements page). These are the ONLY materials you are permitted to have present with you. Otherwise, this is a closed-book/materials midterm quiz.  JULY 28 2025 FINAL EXAM.docx FL RULE CIV PRO 2025 APPROVED QUIZ COPY-1.pdf For uploading your answers: you can download the Word version of the exam and clearly write your answers within that Word document and upload it here.  If any questions, please do let me know. Thanks! 

Your exam is linked below. Do your work on your own paper making sure to write clearly so that I can see your answers when you scan or take a picture of them. Email me the scans of your work no later than 70 minutes after you open the exam. This is a “50 minute” exam but I am allowing for extra time for scanning, emailing and any technological issues that arise.  Late work will not be accepted. Do not exit the test or close Proctorio until you have emailed me your exam. 206Exam2Summer25.pdf

RC circuits: A 4.0

Potential due to point-charges: Three point charges of -2.00

Dielectrics: A parallel-plate capacitor consists of two parallel, square plates that have dimensions 1.0 cm by 1.0 cm. If the plates are separated by 1.0 mm and the space between them is filled with teflon, what is the capacitance of this capacitor? (The dielectric constant for teflon is 2.1, and

Energy in capacitors: Two square air-filled parallel plates that are initially uncharged are separated by 1.2 mm, and each of them has an area of 190 mm2. How much charge must be transferred from one plate to the other if 1.1 nJ of energy are to be stored in the plates? (

Coulomb’s law: A + 7.00

Resistivity: A cylindrical wire has a resistance R and resistivity

Parallel-plate capacitors: A parallel-plate capacitor has plates of area 0.60 m2 and plate separation of 0.20 mm. The capacitor is connected across a 12.0 V potential source. (

Ohm’s law: How much current will be flowing through a 40.0 m length of cylindrical metal wire with radius 0.0 mm if it is connected to a source supplying 16.0 V?  The resistivity of this metal is 1.68 × 10-8