Consider a metal single crystal oriented such that the normal to the slip plane and the slip direction are at angles of 60° and 35°, respectively, with the tensile axis. If the critical resolved shear stress is 7 MPa, will an applied stress of 13 MPa cause the single crystal to yield? If not, what stress will be necessary?

This single phase of the iron-carbon phase diagram can have up to 2.14 wt% carbon

For a particular crystal structure, the slip plane is most likely to be?

Consider a metal single crystal oriented such that the normal to the slip plane and the slip direction are at angles of 60° and 35°, respectively, with the tensile axis. If the critical resolved shear stress is 6.2 MPa, will an applied stress of 20 MPa cause the single crystal to yield? If not, what stress will be necessary?

A Mg-Pb alloy of composition 81 wt% Pb and 19 wt% Mg is slowly cooled from 700°C. At what temperature does the first solid form and what is the composition of the solid?

What is the maximum solubility of Sn in Pb?

Which equation best describes the eutectoid reaction

Use the TTT diagram below and assume that the initial temperature is 760 ˚C What is the nature of the microstructure, in terms of 1) microconstituents present and 2) approximate percentages of the microconstituents when the specimen is rapidly cooled to 575°C, held for 10 seconds, rapidly cooled to 350°C, held for 100 seconds, then quenched to room temperature.

For the Cu-Ni phase diagram below, what fraction of the system is solid for 55 wt% Ni at 1300C?

A Mg-Pb alloy of composition 30 wt% Pb and 70 wt% Mg is slowly cooled from 700°C. At what temperature does the first solid form and what is the composition of the solid?