The BILEVEL mode is being discussed. Technician A says that air may be directed to the panel and floor in the cooling mode. Technician B says that air may be directed to the panel and floor in the heating mode. Who is correct?

In the MAX cooling position the main source of air is from

The air box typically contains two doors to control temperature and function. They are known as the blend door and the __________ door.

Tech A says the bypass hose is used to regulate coolant system pressure. Tech B says that radiator hoses should be checked during routine maintenance. Who is correct?

Technician A says that mode doors may be electrically operated. Technician B says that mode doors may be vacuum operated. Who is correct?

The purpose of the desiccant bag in a receiver/drier or accumulator is to ______.

Unloaded performance test is being performed. The center vent temperature is 40o. The low side pressure is ____________ psi. UPerfTestSm.jpg [BLANK-1]

 4-29 TXV SYS for test(2).jpg Refer to the figure above. Technician A says that the component identified by E is the condensor. Technician B says that the component identified by C is the accumulator. Who is correct?

Unloaded performance test is being performed. The ambient temperature is 110o. The high side pressure is _____________ UPerfTestSm.jpg [BLANK-1]

The A/C compressors on hybrid vehicles have _____colored wires and wire harness covers to indicate they carry high voltage.