Use the AWC Special Design Provisions for Wind and Seismic, 2015 Edition and ASD procedures to answer the following question.A single-story wood-frame building is exposed to a seismic load of wU = 225 lb/ft. For simplicity, assume this load was determined from the load combinations, i.e. do not apply the load combinations to it, and that the building has no windows or doors. Let L = 40 ft, b = 20 ft, and the height of the walls be 10 ft. The walls are sheathed with 15/32-in.-thick Structural I wood structural panels and 8d nails spaced every 6 in. around the panel edges. Is this design adequate for the load?

Use the AWC Special Design Provisions for Wind and Seismic, 2015 Edition and ASD procedures to answer the following question.A building is exposed to a transverse load of wU = 365 lb/ft due to wind. Assume this load was determined from the ASD load combinations, i.e. do not apply the load combinations to it. The wood structural panel is 7/16-in. thick 24/16 span-rated sheathing blocked. Nails are 8d common and spaced every 6 in. at diaphragm boundaries and all panel edges utilizing a single row of nails. Is this design adequate for the transverse load? Let L = 56 ft and b = 30 ft.

Use the AWC Special Design Provisions for Wind and Seismic, 2015 Edition and ASD procedures to answer the following question.A single-story wood-frame building is exposed to a seismic load of wU = 210 lb/ft. For simplicity, assume this load was determined from the load combinations, i.e. do not apply the load combinations to it, and that the building has no windows or doors. Let L = 48 ft, b = 30 ft, and the height of the walls be 8.5 ft. The walls are sheathed with 1/2-in.-thick particalboard sheathing and 8d nails spaced every 6 in. around the panel edges. Is this design adequate for the load?

Use the AWC Special Design Provisions for Wind and Seismic, 2015 Edition and ASD procedures to answer the following question.A single-story wood-frame building is exposed to a wind load of wU = 300 lb/ft. For simplicity, assume this load was determined from the load combinations, i.e. do not apply the load combinations to it, and that the building has no windows or doors. Let L = 48 ft, b = 30 ft, and the height of the walls be 9.5 ft. Ignoring the effects of gravity loads, what is the net maximum uplift force at the base of the shear walls?

Use the AWC Special Design Provisions for Wind and Seismic, 2015 Edition and ASD procedures to answer the following question.A single-story wood-frame building is exposed to a wind load of wU = 310 lb/ft. For simplicity, assume this load was determined from the load combinations, i.e. do not apply the load combinations to it, and that the building has no windows or doors. Let L = 44 ft, b = 14 ft, and the height of the walls be 10 ft. The walls are sheathed with unblocked wood structural panels. Are the shear walls satisfactory in regard to the maximum shear wall aspect ratio?

Use the AWC Special Design Provisions for Wind and Seismic, 2015 Edition and ASD procedures to answer the following question.A building is exposed to a transverse load of wU = 375 lb/ft due to wind. Assume this load was determined from the ASD load combinations, i.e. do not apply the load combinations to it. The wood structural panel is 7/16-in. thick 24/16 span-rated sheathing unblocked. Nails are 8d common and spaced every 6 in. at diaphragm boundaries and supported panel edges. Is this design adequate for the transverse load? Let L = 42 ft and b = 30 ft.

Determine the reference withdrawal design value, W, for a smooth shank carbon steel nail or spike with a diameter of 0.148-in. driven into the side grain of a wood member with a specific gravity of 0.52 where the fastener axis is perpendicular to the wood fibers.

A single-story wood-frame building is exposed to a wind load of wU = 345 lb/ft. For simplicity, assume this load was determined from the load combinations, i.e. do not apply the load combinations to it, and that the building has no windows or doors. Let L = 24 ft, b = 10 ft, and the height of the walls be 9 ft. What is the unit shear in the shear walls?

A nailed shear connection is fabricated with lumber that has a moisture content of 17 percent. The lumber remains above 22 percent while the connection is in service. What wet service factor, CM, should be used?

A building with a non-structural interior wall is exposed to a transverse load of w = 225 lb/ft. Assume this load was determined from the load combinations, i.e. do not apply the load combinations to it. What is the maximum chord force? Let L = 40 ft, a = 30 ft, b = 10 ft, be = 20 ft, and bi = 7 ft.