Build the series-parallel circuit shown below. (If you do not have the exact value of the resistor handy, please use the closest value that you have and mention in the exam clearly the value that you using). Calculate and measure the total resistance and total current and record the data in table 1 Total resistance calculated by series-parallel transformation (Ohms)   Resistance Measured using a multimeter. (ohms)   Compute the total resistance using ohms law R= V/I (ohms)   Calculate the total current using ohms law (It) = V/Rt (mA)   Measure the total current (It) (mA)   Table 1 Measure the voltage across R1 through R8 and record the data in table 2 Measure the current through R1 through R8 and record the data in table 2 Resistor Voltage (v) Current (mA) R1     R2     R3     R4     R5     R6     R7     R8                                                                           Table 2 Open R3 resistor from one end and then measure the total current It=________mA. Did the total current shows in table 1 change? If so, explain the concept. Put R3 back in the circuit and open the end of R4 and then measure the total current again, It=_______mA. Did the total current shows in table 1 change? Explain the concept.    

The parallel combination of a 330 Ohm resistor and a 470 Ohm resistor is in series with the parallel combination of four 1.0 Kohm resistors. A 100 V source is connected across the circuit. The resistor(s) with the most voltage has (have) a value of

The parallel combination of a 330 Ohm resistor and a 470 Ohm resistor is in series with the parallel combination of four 1.0 Kohm resistors. A 100 V source is connected across the circuit. The resistor with the most current has a value of

One current into a junction is 500 mA and the other current into the same junction is 300 mA. The total current out of the junction is 

Write your essay responding to the article.

When a 1.2 kOhm resistor and a 100 Ohm resistor is connected in parallel, the total resistance is 

Two 1.0 kOhm resistors are in series and this series combination is in parallel with a 2.2 kOhm resistor. The voltage across one of the 1.0 kOhm resistor is 6V. the voltage across the 2.2 kOhm resistor is

What is the sample standard deviation for the data given:    27.0, 27.00, 27.000, 27.0, 27.0

The fertilized egg receives how many chromosomes from the father?

VIDEO INSTRUCTIONS Take time to prepare and plan for each video response. Take notes as necessary. Use specific examples from your own experiences of living the 4 Disciplines principles, do not provide generalized knowledge. Use 4 Disciplines language whenever you can. Please use the “Record/Upload Media” Option in the Rich Text Editor to record your Video Response.  For each question below, click on the three dot overflow menu.  Click on the Media dropdown icon as circled in red below.        Click on Upload/Record Media.     When the modal pops up, please click on the ‘Record’ tab.          Note: You will find a timer at the bottom right hand corner of your video screen, so you can track the length of your video.