GradePack

    • Home
    • Blog
Skip to content
bg
bg
bg
bg

GradePack

Pathos is an appeal to the emotions.

Pathos is an appeal to the emotions.

Read Details

A thesis statement should be a statement of fact.

A thesis statement should be a statement of fact.

Read Details

A comma splice is a type of run-on sentence.

A comma splice is a type of run-on sentence.

Read Details

Technologists can assist the exposure field recognition proc…

Technologists can assist the exposure field recognition process when making multiple exposures on one IR by1. masking the unused portion of the IR with lead sheets.2. ensuring the body part is centered within each exposure field.3. increasing the distance between exposure fields.4. maintaining equidistance and keeping collimation parallel with the edge of the IR.

Read Details

A PA chest projection was obtained using a grid with a recom…

A PA chest projection was obtained using a grid with a recommended 40-inch focal range with a 72-inch SID. Where would the grid cutoff be demonstrated on the projection?

Read Details

What technical factor controls the amount of scatter in digi…

What technical factor controls the amount of scatter in digital imaging?

Read Details

A satisfactory radiograph is produced using 10 mAs at 85 kVp…

A satisfactory radiograph is produced using 10 mAs at 85 kVp with a 10:1 grid. A second film is requested using a 16:1 grid. What mAs is needed to produce the second radiograph?

Read Details

What is an/are example(s) of unacceptable electronic annotat…

What is an/are example(s) of unacceptable electronic annotations on digital images?

Read Details

Causes of grid cutoff, when using focused reciprocating grid…

Causes of grid cutoff, when using focused reciprocating grids, include which of the following? 1. inadequate SID 2. x-ray tube off-center with the long axis of the lead strips 3. angling the beam in the direction of the lead stripes

Read Details

A Radiographer should use a grid when the part thickness is…

A Radiographer should use a grid when the part thickness is above ________  and the technical factors used is above ______.

Read Details

Posts pagination

Newer posts 1 … 54,334 54,335 54,336 54,337 54,338 … 72,794 Older posts

GradePack

  • Privacy Policy
  • Terms of Service
Top