A thesis statement should be a statement of fact.

A comma splice is a type of run-on sentence.

Technologists can assist the exposure field recognition process when making multiple exposures on one IR by1. masking the unused portion of the IR with lead sheets.2. ensuring the body part is centered within each exposure field.3. increasing the distance between exposure fields.4. maintaining equidistance and keeping collimation parallel with the edge of the IR.

A PA chest projection was obtained using a grid with a recommended 40-inch focal range with a 72-inch SID. Where would the grid cutoff be demonstrated on the projection?

What technical factor controls the amount of scatter in digital imaging?

A satisfactory radiograph is produced using 10 mAs at 85 kVp with a 10:1 grid. A second film is requested using a 16:1 grid. What mAs is needed to produce the second radiograph?

What is an/are example(s) of unacceptable electronic annotations on digital images?

Causes of grid cutoff, when using focused reciprocating grids, include which of the following? 1. inadequate SID 2. x-ray tube off-center with the long axis of the lead strips 3. angling the beam in the direction of the lead stripes

A Radiographer should use a grid when the part thickness is above ________  and the technical factors used is above ______.

As a radiographer, you are using a DR system that displays EI#’s as part of the DICOM header. The EI#s are calculated as directly proportional and linear to exposure. The image you have created shows marginal quantum noise and an EI# of 1400. The exposure technique you used was 85 kVp@ 15 mAs. To improve image quality and eliminate the objectionable noise, your next step should be to