DR detector element saturation can result in __________.

A satisfactory radiograph is produced using 8 mAs at 85 kVp without a grid. A second film is requested using an 8:1 grid. What mAs is needed to produce the second radiograph?

In which of the following systems does the radiographer select the anatomic part from the console menu?

A Potter-Bucky diaphragm must move the grid in a direction that is ____ to the direction of the grid lines.

What rule is used in fixed exposure technique systems?

Examples of artifacts that must be accepted include all of the following except1. pacemakers.2. dental bridges.3. pleural drainage tubes secured with safety pins.4. endotracheal tubes.5. heart monitoring lines.

Given the image of a box on an incline shown in Question 21, If the static friction coefficient between the box and the slope is 0.5, what magnitude of horizontal force is required to push the box up the slope?  Provide your answer in kN, but do not include units in your submittal.

Given the image of a box on an incline shown in Question 21, If the static friction coefficient between the box and the slope is 0.2, what magnitude of horizontal force is required to prevent the box from sliding down the slope?  Provide your answer in kN, but do not include units in your submittal.

Essential characteristics of a PACS include:1. distribution and retrieval of digital images2. creation of digital images3. radiation dosage documentation4. display of digital images5. voice-activated dictation6. digital image storage and long-term archival

The differences between CR and DR include 1. CR uses IPs 2. CR has higher DQE and lower patient dose 3. CR images are displayed immediately